Nagelzangen

This SONNENSCHEIN nail nipper is hot-forged from stainless steel. The blades are precisely ground and sharpened. Initially they will only meet at their very tips. When slight pressure is applied on the handles, will the cutting edges close completely. This ensures that your nails are not squeezed, but really cut off neatly. By the way: The weakest part of any nipper is its spring. The wire spring of this nail nipper can be easily exchanged if necessary. Replacement springs can be also ordered from this shop. Please, make sure to choose the right size!

This matt SONNENSCHEIN nail nipper is hot-forged from stainless steel. The blades are precisely ground and sharpened. Initially they will only meet at their very tips. When slight pressure is applied on the handles, will the cutting edges close completely. This ensures that your nails are not squeezed, but really cut off neatly. By the way: The weakest part of any nipper is its spring. The wire spring of this nail nipper can be easily exchanged if necessary. Replacement springs can be also ordered from this shop. Please, make sure to choose the right size!

To ensure a long service life this 11 cm nail nipper is hot forged from stainless steel and then manufactured in a traditional way. The cutting edges are manually adjusted so that they close precisely and cut the nails cleanly. When it comes to nippers, "closing precisely" means that the two cutting edges initially only meet at their very tips, while there still remains a small column oflight to be visible through the rest of the cutting edges. The cutting edges then close completely from top to bottom, when slight pressure on the handles. So the nippers cut your nails neatly without squeezing them. The wire spring, which serves to open the nipper again after cutting, can be exchanged easily in case it breaks after a longer period of use. The matching spare spring is available in this shop. Entirely made of stainless steel this nipper is antiallergenic and can be hygienically desinifected and sterile treated. Alternatively this nail nipper is also available with a total length of 130 mm.

This chrome-plated SONNENSCHEIN nail clipper is hot-forged. Their blades are precise so that they only touch the tips when cutting. Use light pressure to close them completely. This ensures that your nails can be cut clean and precisely. The buffer spring is particularly robust and presses the clipper with ease.

For a long service life these nail niippers are hot-forged from stainless steel and then manufactured in a traditional way. The cutting edges are manually adjusted so that they close precisely and cut the nails cleanly. When it comes to nippers, "precise closing" means that the two cutting edges initially only meet at their very tips, while a small column of light still remains visible between the rest of the cutting edges. The cutting edges close completely from top to bottom, when slight pressure is being applied on the handles. So you can cut your nails cleanly without squeezing them. Thanks to their total length of 13 cm and the resulting leverage force, these nail nippers are also suitable to cut thicker toenails easily. The wire spring, which opens the nippers again after cutting, can be exchanged easily in case it breaks after a longer period of use. Replacement springs are available from this shop. Entirely made of stainless steel these nippers are antiallergenic and can be hygienically desinfected and steril treated.

For a long service life these nail nippers are hot-forged from stainless steel and then manufactured in a traditional way. The cutting edges are manually adjusted so that they close precisely and cut the nails cleanly. When it comes to nippers, "precise closing" actually means that the two cutting edges initially only meet at their very tips, while a small column of light remains to be seen between the rest of the cutting edges. The cutting edges close completely from top to bottom, once slight pressure is being applied on the handless. So you can cut your nails cleanly without squeezing them. Thanks to their total length of 135 mm and the resulting leverage force, these nail nippers are also well suitable to cut even thicker toenails easily. The robust wire spring, which re-opens the nippers after cutting, can be exchanged easily in case it breaks after a longer period of use. Replacement springs are available from this shop. Entirely made of stainless steel these premium quality nippers are antiallergenic and can be hygienically desinfected and steril treated.

This head cutter is part of our product range, specifically developed for the needs of diabetics. It is carefully manufactured in Solingen and meets the highest quality requirements. The scissors are made of stainless steel, sterilisable and anti-allergenic. The tips of this head cutter are rounded to minimize the risk of injury. With the head cutter nail clipper, the cutting of even the strongest toenails will be a piece of cake: the special crescent-like shape of the cutting edges, which corresponds to the natural shape of nails, facilitates the shortening of nails by optimally using the leverage effect. In addition, the head cutter is characterized by a particularly high degree of stability, since one part is "pierced" by the other (in contrast to most other clippers where the two parts are coated and then riveted). This model is especially suitable for smaller ladies' hands; for men, we offer a larger model of head cutter with a length of 140 mm. The double spring easily presses the clippers. As the weakest part of the clippers, it can be easily exchanged in case it break under pressure. Replacement springs are, of course, also available through our shop.

For a long service life, these pedicure nail nippers made of stainless steel are hot-forged by the traditional Solingen blacksmith Erich Seiffert and then manufactured in traditional craftsmanship in Solingen. These pedicure nail nippers are designed to cut even the hardest of toenails cleanly and effortlessly. With a total length of 140 mm, it fully uses the leverage of its long shanks. The box-jointed production method ensures a high level of stability. "Box jointed" means that the passage in the nipper's upper part is first heated red-hot and widened in order to then feed the lower part through. In a final step the cutting edges of these nippers are finally adjusted by hand so that they close precisely and cut the nails cleanly. In the case of nippers, "closing precisely" means that the two cutting edges initially only meet at their very tips, while a column of light is still visible through the rest of the cutting edge. The cutting edges close completely from top to bottom, when slight pressure is being applied on the handles. So the nail is cut cleanly and not squeezed off! The double spring, which pushes the nippers open again after cutting, can of course be easily replaced, if broken or tired after a long period of use. Replacement springs are available from this shop. Made entirely of stainless steel, these premium quality nail nippers are hypoallergenic and can be both hygienically disinfected and sterile treated. The mat-frosted finish allows for a glare-free work.

These premium quality pedicure nail nippers make it much easier to shorten even the strongest finger and toenails. Firstly, there is the special moonshape of the cutting edges. It enables the pliers to be handled at a favorable angle. Secondly,  the box-jointed production method, in which the lower fork is "placed through" the upper one, which is red-hot heated and widened, results in a high level of stability. These nippers are hot-forged from stainless steel by the traditional Solingen blacksmith Erich Seiffert and carefully handcrafted in Solingen. The cutting edges are filed by hand so that they close precisely and cut the nails cleanly. Simply top quality "made in Solingen"! Supplied with a leather hood to protect the pliers head. The double spring opens these nippers. Being the weakest wearing part of these nippers, the springs can be easily replaced should they break under load. Of course, replacement springs can also be obtained from our shop. Made entirely of stainless steel, these high-quality nail clippers are hypoallergenic and can be both hygienically disinfected and sterile treated. The mat-frosted finish allows for a glare-free work.

This head cutter is part of our product range, specifically developed for the needs of diabetics. It is carefully manufactured in Solingen and meets the highest quality requirements. The head cutter is made of stainless steel, sterilisable and anti-allergenic. The tips of this head cutter are rounded to minimize the risk of injury. With the head cutter nail clipper, the cutting of even the strongest toenails will be a piece of cake: the special crescent-like shape of the cutting edges, which corresponds to the natural shape of nails, facilitates the shortening of nails by optimally using the leverage effect. In addition, the head cutter is characterized by a particularly high degree of stability, since one part is "pierced" by the other (in contrast to most other clippers where the two parts are coated and then riveted). This model is especially suitable for men; for smaller ladies' hands, we offer a larger model of head cutter with a length of 115 mm. The double spring easily presses the clippers. As the weakest part of the clippers, it can be easily exchanged in case it break under pressure. Replacement springs are, of course, also available through our shop.

For a long service life, these corner nail nippers made of stainless steel are hot-forged by the traditional Solingen blacksmith Erich Seiffert and then manufactured in traditional craftsmanship in Solingen. These corner nail nippers with their straight blades are specially designed to cut ingrown toenails cleanly. With a total length of 130 mm, it fully uses the leverage of its long shanks. The box-jointed production method ensures a high level of stability. "Box jointed" means that the passage in the nipper's upper part is first heated red-hot and widened in order to then feed the lower part through. In a final step the cutting edges of these corner nail nippers are finally adjusted by hand so that they close precisely and cut the nails cleanly. In the case of nippers, "closing precisely" means that the two cutting edges initially only meet at their very tips, while a column of light is still visible through the rest of the cutting edge. The cutting edges close completely from top to bottom, when slight pressure is being applied on the handles. So the nail is cut cleanly and not squeezed off! The double spring, which pushes the nippers open again after cutting, can of course be easily replaced, if broken or tired after a long period of use. Replacement springs are available from this shop. Made entirely of stainless steel, these premium quality nail nippers are hypoallergenic and can be both hygienically disinfected and sterile treated. The mat-frosted finish allows for a glare-free work.

This nail edge clipper is part of our product range, specifically developed for the needs of diabetics. It is carefully manufactured in Solingen and meets the highest quality requirements. The clipper is made of stainless steel, sterilisable and anti-allergenic. The tips of this clipper are rounded to minimize the risk of injury. Nails edge clippers are particularly suitable for shortening strong nails. With this large clipper of 13 cm in length, you can easily deal with the strongest toenails due to its particularly high stability: one part is "pierced" by the other (unlike most other clippers, where the two parts are coated and then riveted). The double spring easily presses the clippers. As the weakest part of the clippers, it can be easily exchanged in case it break under pressure. Replacement springs are, of course, also available through our shop.